Assembly instructions, A warning, Wand»telescoping – Kenmore 116.25812 User Manual
Page 7: Power-iviate, Warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A
Please pay special attention to these hazard alert boxes, and follow any instruc
tions given. WARNING statements alert you to such dangers as lire, electric
shock, burns and personal injury, CAUTION statements alert you to such dangers
as personal injury and/or property damage.
ASSEMBLY INSTRUCTIONS
A
WARNING
Electrical Shock Hazard
DO NOT plug into electrical supply until
assembly is complete. Failure to do so
could result in electrical shock or
injury.
Before assembling vacuum cleaner, check
the
PACKING LIST
on the cover of the
separate
REPAIR PARTS LIST.
Use this list
to verify that you have received all the
components of your new Kenmore vacuum
cleaner.
WAND»TELESCOPING
The wand length is
adjustable and
requires no
assembly. To
adjust, simply
push down on the
wand adjust button
and slide the
upper wand to the
desired height.
Wand
Length
Adjust
Button
-Keep
Hand
Above
This
Tab
Wand
Swivel
The swivel, located
on the Power-Mate®,
allows you to turn
the handle to the left
side to reach farther
under low furniture,
When adjusting the
wand length you
may have to hold the
Power-Mate* with
your hand or foot
POWER-IVIATE®
Insert wand into Power-Mate® until the wand
button snaps into place
To remove: Step on wand release pedal,
then pull up on wands.
UL'
£ ' r.
fJJ
"SI