Before you begin, How to set the oven for baking or roasting, Preheating and pan placement – Kenmore 362.6278 User Manual

Page 8: Aluminum foii, Using the oven

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

USING THE OVEN

Before you begin...

To avoid possibie burns, place the shelves In the
desired position before you turn the oven on.

The shelves have stop-locks,
so that when placed correctly
on the supports (A through

E), they will stop before

coming completely out; they
also will not tilt
When placing and removing
cookware, pul! the shelf out
to the bump on the shelf
support..

To remove a shelf, puli it
toward you, tilt the front end

up and pull it out.

To replace, place the end of
the shelf (stop-locks) on the

support, tilt up the front and
push the shelf in,

NOTE: The shelf Is not

designed to slide out at the special low (R) shelf position.

How to Set the Oven for Baking or Roasting

1. Turn the Oven Temperature knob to the temperature

you desire,

2. Check food for doneness at the minimum time on

the recipe. Cook longer if necessary.

3. Turn the Oven Temperature knob to OFF when

cooking is complete.

0

m

0

©

0

0

Preheating and Pan Placement

Preheat the oven if the recipe calls for it. To preheat,

set the oven at the correct temperature, Preheating is

necessary for good results when baking cakes, cookies,

pastry and breads .

For ovens without a preheat indicator light or tone,
preheat 10 minutes.

Baking results will be better if baking pans are centered

in the oven as much as possible. Pans should not touch
each other or the walls of the oven, If you need to use
two shelves, stagger the pans so one is not directly
above the other, and leave approximately 1 Vf from the
front of the pan to the front of the shelf .

Aluminum Foii

Never cover the oven bottom with aluminum foil.

You can use aluminum foil to line
the broiler pan and broiler grid,.
However, you must mold the foil

tightly to the grid and cut slits in it
Just like the grid.

Aluminum foil may also be used to
catch a spillover. To do so, place a small sheet of foil on a

lower shelf several inches below the food.

Never entirely cover a shelf with aluminum foil. This will

disturb the heat circulation and result in poor baking.

How to Set the Oven for Broiiing

1. Place the food on the broiler grid in the broiler pan.

2. Follow suggested shelf positions in the Broiling Guide.

3. Turn the Oven Temperature

knob to BROIL.

The oven has 6 sheH positions.

Leave the door open

to the broil stop position.
The door stays open

by itself, yet the proper
temperature is
maintained in
the oven

Type of Food

Shelf Position

Frozen pies (on cookie sheet)

c

Angel food, bundt or pound rakes

BorC

Biscuits, muffins, brownies, cookies,

cupcakes, layer cakes, pies

BorC

Casseroles

BorC

Turkey

RorA

Roasting

R,AorB

Advertising