To set or change the temperature for baking, To set the controls for baking, To set control forcontinuous baking – Kenmore 970-334421 User Manual
Page 11: To set control for oven lockout, To set control for oven lockout feature, Setting oven controls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Oven Controls
To Set or Change the Temperature for Baking
The oven can be programmed to bake at any temperature from 170°F to 550°F (65°C to 287°C).
To Set the Controls for Baking:
1. Press ■ "----------------- " appears in the display.
2. Within 5 seconds, press the or 'V . The display will show "350“F {177°C)." By pressing and holding the
a
. or
"V , the temperature can then be adjusted in 5°F (1 °C) increments.
3. As soon as the
a
or "V is released, the oven will begin heating to the selected temperature. When the displayed
temperature reaches the desired baking temperature, the control will beep 3 times.
4. To cancel the baking function, press .
To Change the Oven Temperature after Baking has Started:
1. Press and make sure the bake temperature is displayed.
2. Press the A or V to increase or decrease the set temperature.
To Set Control for Continuous Bake or 12 Hour Energy Saving
The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more than
11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.
To set control forcontinuous baking:
1. Press , “0:00” will appear in the display.
2. Press and hold down for 5 seconds until tone is heard, “------------ hr” will appear in display for continuous cooking. The
current time of day will return to the display.
3. To cancel the Continuous Bake function, press
and hold for Sseconds until tone is heard. “12hr” will appear in display
indicating that the control has returned to the 12 Hour Energy Saving feature.
To Set Control for Oven Lockout:
The control can be programmed to lock the oven door and inactivate the oven controls.
To set Control for Oven Lockout feature:
1
.
Press
and hold for 3 seconds. “Loc” will appear in display, the “Door Locked” indicator light will flash and the motor
driven door lock will begin to close automatically. DO NOT open oven door while the indicator light is flashing. Allow about
15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will appear in the display.
2. To cancel the lockoutfeature, press [^^and holdfor 3 seconds. The control will unlock the oven doorand resume normal
operation.
Note: if any control pad is pressed while in the Oven Lockout mode, “Loc” will appear in the display until the control
pad is released.
11