Kenmore 970-334421 - Manual (Page 5)

Important Safety Instructions
Grounding type
wall receptacle
Do not, under any
circumstance, cut,
remove, or bypass
the grounding prong.
GROUNDING INSTRUCTIONS
(electric ignition models only)
iàWARNING I Avoid fire hazard or eiectrical shock. Do not use an
adapter plug, an extension cord, or remove grounding prong from
electrical power cord. Failure to follow this warning can cause
serious injury, fire or death.
Power supply cord
with 3-prong
grounding plug
Seethe INSTALLATION INSTRUCTIONS packaged with this
range for complete installation and grounding instructions.
A WARNING I This appliance is equipped with a 3-prong grounding
plug for your protection against shock hazard and should be plugged
directly into a properly grounded receptacle. DO NOT cut or remove
the grounding prong from this plug.
For personal safety, the range must be properly grounded. For
maximum safety, the power cord must be plugged into an electrical
outlet that is correctly polarized and properly grounded.
If a 2-prong wall receptacle is the only available outlet, it is the
personal responsibility of the consumer to have it replaced with a
properly grounded 3-prong wall receptacle installed by a qualified
electrician.
IMPORTANT SAFETY NOTICE
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known
to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure
to such substances.
SERIAL
PLATE
LOCATION
You will find the model and serial number
printed on an serial plate. The serial plate is
located on the right side of the oven front
frame in the storage or warmer drawer
compartment.
Please see the illustration for exact location.
Remeber to record the serial number for
future reference (See page 2, under Product
Record).
located on right side of range frame.