Warning – Kenmore 796.4031#9## User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CARE AND CLEANING

WARNING

I

To reduce the risk of fire, eiectric shock, or injury to persons, read and follow this

entire manual, including the Important Safety Instructions, before operating this washer.

Unplug the washer before cleaning to avoid the risk of electric shock.

Failure to follow this warning can cause serious

injury, fire, electrical shock, or death.

Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer.

They will damage the finish.

REGULAR CLEANING

Cleaning the Exterior

Proper care of your washer can extend its life. The outside of

the machine can be cleaned with warm water and a mild, non­
abrasive household detergent.

Immediately wipe off any spills with a soft, damp cloth.

IMPORTANT:

Do not use methylated spirits, solvents, or

similar products. Never use steel wool or abrasive cleaners
because they can damage the surface.

Care and Cleaning of the Interior

Use a towel or soft cloth to wipe around the washer door

opening, door seal, and door glass. These areas should be
kept clean to ensure a watertight seal. Be sure to wipe under
the inside rubber seal to remove any moisture or soil.

Always remove Items from the washer as soon as the cycle is
completed. Leaving damp items in the washer can cause
wrinkling, color transfer, and odor.

Run the CLEAN WASHER cycle once a month, or more often if
needed, to remove detergent buildup and other residue.

Read these instructions carefully before beginning the
CLEAN WASHER cycle.

^ Open the door and remove any clothing in the wash drum.

Q Open the dispenser drawer.

A Add liquid chlorine bleach or tub cleaner.

Some powder or tablet tub cleaners which are manufactured for
this purpose can be used.
(NOTE : Do not add any laundry detergent or fabric softener to
the drawer when using CLEAN WASHER.)

- If using liquid chlorine bleach

Add liquid chlorine bleach to the bleach compartment of the
drawer. (NOTE : Do not exceed the maximum fill line and do

not pour undiluted liquid bleach directly into the wash drum.)

- If using powder cleaner

Remove the liquid detergent cup and add powder cleaner to

the main wash compartment of the drawer.

- If using tablet cleaner

Add tablet cleaner to the wash drum directly.

(NOTE : Do not add tablet cleaner to the drawer.)

Q Close the drawer and washer door.

0 Select CLEAN WASHER and press START.

NOTE:

It is recommended that CLEAN WASHER should be

repeated monthly. If mildew or musty smell already exists, run
CLEAN WASHER for 3 consecutive weeks. After CLEAN WASHER
is complete or when the washer is not used, leave the washer door

open for better ventilation and drying inside of the washer.

Door Seai and Giass Cieaning

Due to the location and nature of the door seal, some detergent
and soil residue may build up on the door glass and seal.
Periodic cleaning with a bleach solution can help remove
buildup and stains and can help sanitize the seal to prevent

odors.

NOTE:

Wear rubber gloves and eye protection while performing

the following procedure:

0 Dilute 3/4 cup (177 ml) liquid chlorine bleach with 1 gallon

(3.8 L) of warm/hot water.

O

Use this solution to wipe down all

surfaces of the gasket and glass
gasket to remove any deposits

left there. (The gasket is stiff. Be

sure to fold back the lip of the
gasket to get under the edge
where residue can build up.)

0

Wipe the gasket and glass with a dry cloth.

0 Leave the door open to allow the gasket to dry completely.

NOTE:

• Follow the manufacturer's instructions for proper use of bleach.

• Do not use undiluted bleach as this will damage the gasket.

Removing Minerai Buiidup

If you live in an area with hard water, lime scale can form on
internal components of the washer. Use of a water softener is
recommended in areas with hard water.
Use a descaler, such as Washer Magic®, and run the CLEAN

WASHER cycle before washing clothing.

Do NOT use steel wool or abrasive cleaners; they can damage

the surface.

Storing the Washer

If the washer will not be used for an extended period of time and
is in an area that could be exposed to freezing temperatures:

0 Turn OFF water supply tap.

0

Disconnect hoses from water supply and drain water from hoses.

0

Plug the power cord into a properly grounded electrical outlet.

0 Add 1 gallon of nontoxic recreational vehicle (RV)antifreeze to

the empty wash drum. Close door.

0

Select the spin cycle and let washer spin for 1 minute to drain out

all the water.

NOTE:

Not all of the RV antifreeze will be expelled.

0 Unplug the power cord, dry the drum interior with a soft cloth, and

close the door.

0 Remove the inserts from the dispenser. Drain any water in

compartments and dry the compartments.

0

Store the washer in an upright position.

0

To remove the antifreeze from the washer after storage, run

washer through a complete cycle using a small amount of
detergent. Do not add laundry!

m

O

Z

m

21

Advertising