Maintenance (coni) – Kenmore 796.4031#9## User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CARE AND CLEANING
MAINTENANCE (coni)
Cleaning the Drain Pump Filter
Your Washer is equipped with a filter that helps prevent excess
lint and foreign objects like buttons, keys, and coins from
causing damage to the pump. If the washer fails to drain
properly, unplug the washer and allow the water to cool, if
necessary, before proceeding.
m
z
fi)
tfi
1. Open the drain pump filter access panel.
3
.
Remove the plug from the drain hose, and allow the water to
drain completely.
NOTE:
If there is a large amount of water In the tub, you may
have to empty your container several times.
2
.
Unclip the drain hose and pull it out. Place the end of the
drain hose into a shallow pan or a floor drain. Use care not to
pull the hose out too far or it may not drain properly.
4
.
Twist the pump filter counterclockwise to remove. Remove
any lint and foreign objects from the pump filter.
Reverse the above steps to reinstall the drain pump filter and
drain hose. Be sure to close the cover panel when finished.
24