Setting the controls, Temperature, Ultra ice – Kenmore TRIO 795.785 User Manual

Page 16: Dispenser, Filter, Light, Alarm, Lock, Temperature mode switch function(°f <->°c), Ensuring proper air circulation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

USING YOUR REFRIGERATOR

SETTING THE CONTROLS

Temperature

• Your refrigerator has a control pad on the dispenser that

lets you regulate the temperature in the freezer and
refrigerator compartments.

* Initially set the refrigerator control at 37°F (3°C) and the

freezer control at 0°F (-18°C). Leave it at this setting for
24 hours (one day) to stabilize. Then adjust the
compartment temperature as desired.

n

5

"

7

.

• Refrigerator Temp Control: 33°F to 46°F (0°C to 8°C)

The lower the number setting, the colder the refrigerator
compartment will become.

• Freezer Temp Control: -6°F to 8°F (-2f °C to -f3°C)

When the setting is at a lower number, the freezer
compartment becomes colder. The refrigerator
compartment becomes warmer because less cold air
flows into the refrigerator.

Ultra Ice

• When you press the “Ultra Ice” button, the graphic

[ (3 ] will light up in the display and it continues for
24 hours. It will automatically shut off after 24 hours
have passed.
Or you can stop this function manually by pressing the
button one more time.

• This function increases both icemaking and freezing

capabilities.

Dispenser

• You can select water, crushed ice, or cubed

ice by pressing 'J button as you desire.

* There could be some dripping after

dispensing. It is recommended to hold your
cup for a couple of seconds after dispensing.

A WARNING: If a door is open, the dispenser wil

work.

not

Filter

• Filter Reset: When the FILTER RESET icon turns on,

you have to change the water filter. Press the FILTER

RESET button for 3 seconds to turn the icon off.

You need to change the water filter approximately every
6 months.

Light

• The dispenser lighter is ‘■'o''* (OFF) after applying the

power, and when you press this button, the dispenser
light is 't* (ON).

Alarm

• When the power is connected to the refrigerator, door

alarm is initially set ON and door alarm display will show
''T (ON).

• When either refrigerator or the freezer door is left open

for more than 60 seconds, the alarm will ding to let you
know the door is open.

• When you close the door, the door alarm will stop

dinging.

• If you want to disable the door alarm function, press

o

button then the door alarm display will switched to *o™
(OFF).

Lock

• The Lock funtion disables all the display buttons (except

the Lock button) and the dispenser operation.

• When the power is initially connected to the refrigerator,

Lock function is off.

• To activate the Lock function: press and hold button

for 3 seconds or more. “ (ON) sign will be displayed
and the Lock function is now enabled.

• No buttons other than -ft? button will work including

dispenser button while Lock function is enabled.

• To disable the Lock function, press and hold O button

for 3 seconds or more.

Temperature Mode Switch Function(°F <->°C)

• If you want to convert °F to °C or vice versa, press and

hold the Q Freezer and ® the Refrigerator
temperture buttons simultaneously for 5 seconds or
more.

ENSURING PROPER AIR CIRCULATION

Do not block air channels with any objects or food for air

circulation to prevent food loss due to the lack of cooling air.

16

Advertising