Front cover, To remove, To attach – Kenmore 385.15358 User Manual
Page 11: Service access
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SEWING
machíne
DIV. 20
MODEL 384. 15358
FRONT COVER
SERVICE ACCESS
TO REMOVE:
1.
REMOVE THE FACE COVER, AND REMOVE THE BELT COVER (SEE PAGE 7).
2.
REMOVE DIALS (A).
3.
LOOSEN SETSCREWS (C), (D), (E), (F), AND (G), REMOVE SETSCREWS (H), (I) AND (J),
AND THEN, REMOVE THE FRONT COVER.
NOTE:
UNHOOK THE TAB (K) OF THE REAR COVER WHEN REMOVING THE
FRONT COVER.
TO ATTACH:
4.
MOUNT THE FRONT COVER IN REVERSE PROCEDURE OF THE REMOVING.
Advertising