To attach, Service access – Kenmore 385.15358 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SEWING
machíne
DIV. 20
MODEL 384. 15358
SERVICE ACCESS
REAR COVER
■(D)
TO REMOVE:
1.
REMOVE THE FACE COVER AND BELT COVER (SEE PAGE 7).
NOTE:
PULL UP THE SPOOL PINS.
2.
LOOSEN SETSCREWS (A), (B), (C) AND (D) (2 PCS.), REMOVE SETSCREWS (E), (F), (G)
AND (H), AND THEN, REMOVE THE REAR COVER.
NOTE:
REMOVE THE REAR COVER IN THE ORDER OF (X) (LOWER PART) -► (Y)
(UPPER PART) (Z) (PRESSER FOOT LIFTER PART). (REMOVE THE BED COVER
TOGETHER.)
TO ATTACH:
3.
MOUNT THE REAR COVER IN REVERSE PROCEDURE OF THE REMOVING.
10
Advertising