Kenmore 141.16223 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
NOTE: Before attaching the Cart Bottom Shelf to Cart be sure tank hole on the Bottom is
iocated on the right side.
install the Cart Bottom Shelf between the Cart Legs. Aiign the holes on Cart Legs with the
threaded holes at the corners of Cart Bottom Shelf. Attach loosely the 8 screws then tighten
screws.
Pattern Head Screw 1/4"x2-3/4"
Qty. 8
Ref. # S135G04332
1. Screw the 2 Casters into the Caster Seats. Turn the threaded Caster Stem by hand, clockwise until
it stops. Tighten securely using the Customized Wrench provided.
2. Install the 2 Wheels to the Cart Legs-Wheel Side, by inserting the wheel bolt through the wheel and
axle hole on the cart leg. Put spring washer and 3/8" nut onto bolt and tighten securely using the
Customized Wrench provided. Do not overtighten or wheel will not turn freely. Snap Wheel Hub Caps
onto wheels.