Congratuiations – Kenmore 141.16223 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Important: Before cooking on your grill the first

time, wash the Cooking Grids with warm, soapy
water. Rinse and dry thoroughly. Season with
cooking oil regularly. After cooking is completed,
turn grill to HIGH setting for about five minutes to
bum off excess grease or food residue.

1. Place the 3 Steel Flame Tamers on the lower

ledge above Burners.

Installing Cooking Com ponents

SECONDARY
COOKING R,

2

.

3.

3.

4.

Evenly space the Cooking Grids on the ledge

above the Flame Tamers.

Place the Secondary Cooking Rack into the

slots on the upper left and upper right of Grill

Bowl Side Panels.

Connecting A Liquid Propane Gas
(LPgas) Tank To Your Grill

Place a 20 lb tank with foot ring into the
hole in the Bottom Shelf. SeeBlsiM Make
sure the tank valve is in the OFF positon.
(Turn clockwise to close.) Use provided Wing
Bolt to secure gas tank.

Wing Bolt 1/4"x4-3/8"
Qty. 1

Ref. # S233G04382

Check the tank valve to insure it has proper
external mating threads to fit the hose &
regulator assembly provided. (Type 1 connec­

tion per ANSI Z21.58b-2002)

Be sure all Burner Valves are in the OFF
position.

Inspect the valve connection port and regulator
assembly. Look for damage or debris. Remove
any debris. Inspect hose for damage. Never
use damaged or plugged equipment.

When connecting the regulator assembly to
the tank valve, hand tighten nut clockwise to

a full stop. SeeEJpjDO NOT use a wrench

to tighten because it could damage the Quick

Coupling Nut and result in a hazardous
condition.

Open the tank valve fully (counterclockwise).
Use a soapy water solution to check all
connections for leaks before attempting to light
your grill. See "Checking for LP Gas Leaks"
on page 17. If a leak is found, turn the tank

valve off and do not use your grill until the

leak is repaired.

Disconnecting A Liquid Propane Gas
(LPgas) Tank From Your Grill

Turn the Burner Valves and LP gas tank valve
to the full OFF position. (Turn clockwise to
close.)

Detach the hose and regulator assembly from
the LP gas tank valve by turning the Quick
Coupling Nut counterclockwise.

COOKING GRID-

2ND

CAUTION: When the appliance is not in use, the
gas must be turned off at the supply tank.

Congratuiations

Your Kenmore LP gas grill is now ready for
use. Before the first use and at the beginning
of each season (and whenever the LP gas
tank has been changed):

1. Read all safety, lighting and operating

instructions.

2. Check Gas Vaive Orifices, Burner Tubes

and Burner Ports for any obstructions.

3.

Perform gas leak check according to

instructions found on page 17 of this
manual.

16

Advertising