Setting the clock, Instructions, To set the clock (example below for 1:30) – Kenmore 790.9446 User Manual

Page 13: Changing between 12 or 24 hour time of day display, Press, Display, Using the air guard™ feature, I j n n, N■ j u, Setting oven controls

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Setting the Clock

Changing between 12 or 24 hour display

Setting Oven Controls

Setting the Clock

The CLOCK {©) pad is used to set the clock. The clock may be set for 12 or 24 hour time of

day operation. The clock has been preset at the factory for the 12 hour operation. When the
range is first plugged in, or when the power supply to the range has been interrupted, the timer
in the display will flash the time of day (Fig. 1).

INSTRUCTIONS

To set the clock (example below for 1:30):

1. Press (©). "CLO" will appear in the display (Fig. 2).

2.

Press ©@® pads to set the time of day to 1:30 (Fig. 3).

"CLO" will appear in the display. Press

■ "CLO" will

disappear and the clock will start (Fig. 4).

Changing between 12 or 24 hour time of day display:

1. Press and hold (©) for

6

seconds (Fig. 3). While holding the

PRESS

for 6

seconds

2

.

3.

4.

5.

pad down the current time of day will remain and "CLO" will
disappear from the display (Fig. 4). CONTINUE holding the pad
until a beep is heard.

The display will show either "12h"(Fig. 5) or "24h"(Fig.

6

).

Press Ära to switch between the 12 and 24 hour time of day

display. The display will show either "12h" (Fig. 5) or "24h" (Fig.

i j n n

i C u u

Fig.1

DISPLAY

Fig. 2

■ j n

n

n

■ J u

L L U

Fig.3

Fig. 4

Fig. 5

or@

h

Fig. 6

6

) .

Press to accept the desired change or press (g) to

reject the change.

Reset the correct time as described in

To set the Clock above.

Please note that if the 24 hour time of day mode was chosen,

the clock will now display time from 0:00 through 23:59 hours.

Using the Air Guard™ feature

Your appliance is equipped with a catalytic oven exhaust cleaner that may be turned on during any active cooking process.
This feature helps remove smoke and eliminates 85% of the odors generated when using your oven.

If you wish to have Air Guard™ clean the oven exhaust once cooking has started, press the key.

Note: The

Air Guard™ indicator light will glow anytime the Air Guard™ is active. Air Guard will turn on and cannot be

manually turned off during the Self-cleaning cycle.

13

Advertising