Seif-cleaning, Instructions, When the self-clean cycle is done – Kenmore 790.9446 User Manual

Page 33: Press, Display, 30 hob, Stopping or interrupting a seif-cleaning cycle

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Seif-Cleaning

Setting Flex Clean

Setting Delay Flex Clean

INSTRUCTIONS

When

the

Self-Clean cycle is done:

1

. The time of day,

"Hot, DOOR LOCKED and "CLEAN" icon will

remain in the display (See Fig. 7).

2.

Once the oven has cooled down for approximately 1 HOUR, and
the

"DOOR LOCKED" icon is no longer displayed, the oven

doorcan then be opened.

PRESS

DISPLAY

30 Hob

Fig.7

Stopping or Interrupting

a

Seif-Cleaning cycle:

If it becomes necessary to stop or interrupt a Self-Cleaning cycle

due to excessive smoke or fire in the oven:

1. Press (^.

2.

Once the oven has cooled down for approximately 1 HOUR and
the

"DOOR LOCKED" icon is no longer displayed,the oven door

can then be opened (Fig.

8

).

Fig.8

ffl

IMPORTANT NOTES when using the Self-Clean feature:

1

. The Self-Clean feature will not operate whenever a radiant surface remains ON.

2. A Self-Clean cycle may be started if the appliance has the

Cooktop Lockout active. A Self-Clean cycle cannot be

started if

Oven Lockout feature is active.

f'""

vr

3. If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly
cleaned. Once power is restored, set for another Self-Clean cycle to finish.

4. If your clock is set tor normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12
hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 13 for instructions to set the control for
the 24 hour time of day display mode.

33

Advertising