Setting silent control operation, Instructions, To change control from normal sound operation to – Kenmore 790.9446 User Manual
Page 16: Silent control operation, Press, Display, Setting oven controls, Press display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Oven Controls
• Silent Control Operation
Conv
Bake
Pre
Heat
Slow
Co0k
Conv Conv
Boast Convert
Bake Broil
Warms.
Hold
Flex
Clean
Cook
Time
Delay
Stott
Timer
Set/Off
Addi
Minute
Recipe
Recall
9
Air?
Guard
0
1 2 3
4 5 6
7 8 9
© ffi
0
<
0
>
Oven
Lockoet
Setting Silent Control Operation
The
DELAY START and FLEX CLEAN ci™ pads control the Silent Control operation feature. The Silent Control
operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
To change control from normal sound operation to
silent control operation:
1. To tell if your range is set for normal or silent operation press
and hold (S) for 7 seconds.
will appear and
"DELAY"
will flash in the display (Fig. 1).
2.
Press ciSn to switch between normal sound operation and silent
operation mode. The display will show either
"SP" (Fig. 2)
o r - " ( F i g . 3 ) .
If
"SP" appears (Fig. 2), the control will operate with normal
sounds and beeps. I f a p p e a r s (Fig.3), the control is in the
siientoperation mode.
3. Press to accept the change or press @ to reject the
change.
PRESS
DISPLAY
№) for /seconds
Fig. 2
or@
Fig.3
16