Self-cleaning, What to expect during cleaning, Self-clean cycle time length – Kenmore 790. 3017 User Manual

Page 19: Stopping or interrupting a self-cleaning cycle

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

What to Expect during Cleaning:

While the oven is in operation, the oven heats to temperatures much higher than
those used in normal cooking. Sounds of metal expansion and contraction are
normal. Odor is also normal as the food soil is being removed. Smoke may appear
through the oven vent.

If heavy spillovers are not wiped up before cleaning, they may flame and cause more
smoke and odor than usual. This is normal and safe and should not cause alarm. If

available, use an exhaust fan during the self-cleaning cycle.

Self-Clean Cycle time length

For satisfactory results, use a 2 hour Self-Clean cycle for light soils and a 3 hour

cycle for average or a 4 hour cycle for heavy soils. NOTE: The kitchen area
should be well ventilated using an open window, ventilation fan or exhaust hood
during the Self-Clean cycle. This will help eliminate the normal odors associated
with the Self-Clean cycle.

To Set the Controls for a Seif-Clean Cycle or a Delayed Start
Seif-Clean Cycle:

(Note: If you do not want to start a Delayed Self-Clean Cycle, skips steps 2 & 3.)
1. Be sure the clock shows the correct time of day.

2. Press I

3. Press and hold theyypad to scroll to the time to start the delayed Self-Clean

cycle. Release the pad when the desired time is displayed.

Self-Cleaning

(some models)

4. Press!

-" appears in the display.

5. Press theyyor once. "3:00" appears in the display for a 3 hour cycle.

To change to a 2 hour cycle press'^^. "2:00" appears in the display or to

select a 4 hour cycle press y\. "4:00" appears in the display.

As soon as the controls are set, the motor driven lock will begin to close
automatically and the “Door Locked” indicator light will flash. DO NOT open
the oven door while the light is flashing (it takes about 15 seconds for the
oven door to lock).

6. "CLn" will appear in the display during the Self-Clean cycle and the "Door

Locked" light will glow until the Self-Cleaning cycle is complete or cancelled

and the oven temperature has cooled.

NOTE: A smoke eliminator in the
oven vent converts most of the
soil into a colorless vapor.

ik CAUTION

To avoid possible

burns use care when opening the fc
oven door after the Self-Cleaning ■ ■ L
cycle. Stand to the side of the oven L ■
when opening the door to allow hot L*
air or steam to escape.

CT*

A CAUTION

DO NOT force the

oven door open. This can damage
the automatic door locking system.

Use caution and avoid possible

burns when opening the door after
the

Self-Cleaning

cycle

has

completed. The oven may still be
VERY HOT.

When the Self-Clean Cycle is Completed:

1

.

The time of day or "End" will appear in the display window and the “Clean”
and "Door Lock" light will continue to glow.

2. Once the oven has cooled down for about 1 HOUR and the "Door Lock" light

has gone out, the oven door can be opened.

3. If “End” is in the display and the Select Clean indicator light remains ON,

press The time of day will appear in the display.

NOTE: When the oven is cool, wipe away any residue or powdered ash with a
damp cloth or paper towel.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a Self-Cleaning cycle:

1. Press!

2. Once the oven has cooled down for about 1 HOUR and the "Door Lock" light

3.

has gone out, the oven door can be opened.
Restart the Self-Clean cycle once all conditions have been corrected.

19

Advertising