Check list of all step-by-step guides to install – Kenmore 625.34846 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 1
WATER SOFTENER START-UP
1B.
CHECK LIST OF ALL STEP-BY-STEP GUIDES TO INSTALL
Refer to the Installation Manual, part no.
7141417, for step-by-step guides.
To be sure you have done all the steps to install
the softener, read tile following list. Page num
bers referred to are in the Installation Manual.
✓
is the house water flow going INTO the soft
ener valve INLET? Trace piping to be sure...
pages 10 and 11.
✓
Is the plumbing bypass valve (or 3 valves) set
for SERVlCE?...page 18.
✓
Is the valve drain hose connected the right
way, and without sharp bends or kinks that
could stop or reduce water flow?...page 16.
✓
Is the softener power cable connected to the
transfomiier...and is the transformer plugged
into an inside. 120V-60Hz electrical outlet...
page20I
✓ Be sure to restart tiie water heater...page 20.
M
-tu