Troubleshooting, A warning – Kenmore ASPIRADORA 116.31591 User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TROUBLESHOOTING

Review this table to find do-it-yourself solutions for minor performance problems. Any service

needed, other than maintenance described in this Use & Care Guide, should be performed

by a Sears or other qualified service agent.

A WARNING

Disconnect electrical supply before performing maintenance to the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury.

PROBLEM

POSSIBLE CAUSE

POSSIBLE SOLUTION

Vacuum cleaner
won’t run.

1. Unplugged at wall outlet.

2.

Tripped circuit breaker/blown

fuse at household service panel.

3. Thermal protector tripped.

4. Defective wall outlet.

5. Handle screw not tight.

1. Plug in firmly and push ON/OFF

button.

2. Reset circuit breaker or replace

fuse.

3. Allow vacuum cleaner to cool,

then reset thermal protector.

4. Check with a good

appliance/lamp, have properly
serviced.

5. Tighten screw.

Poor job of

dirt

pick-up.

1. Full or clogged dust bin.

2. Floor tool selector valve,

not in correct position.

3. Wrong pile height

setting.

4. Worn agitator.

5.

Clogged nozzle or bag holder.

6.

Clogged hose.

7. Broken/misplaced belt.

8.

Hose not inserted fully.

9. Motor protection system

activated.

10. Dirty filters.

1. Empty dust bin.

2. Change to correct position.

3. Adjust setting.

4. Replace agitator.

5.

Check CLOG REMOVAL.

6.

Check for clogs.

7 Replace/fix belt.

8. Insert hose fully.

9. Check for clogs.

10. Clean or replace as applicable.

Vacuum Cleaner

picks

up moveable rugs or
pushes too hard.

1. Wrong pile

height

setting.

1. Adjust setting.

Agitator does not turn.

1. Broken belt

2. Thermal protector tripped.

1. Replace belt.

2. Allow vacuum cleaner to cool

40 -

50

minutes

Airflow restricted
with attachment use.
Sound changes.

1. Attachment use restricts air flow.

2. New carpet fuzz clogged air path.

1. Check attachments for fuzz,

lint, pet hair or other debris.

2. Check CLOG REMOVAL and

clean hose.

Difficulty adjusting pile

height setting

1. Vacuum cleaner not in proper

upright position.

1. Place vacuum cleaner in the

locked upright position.

Pet Handi

Mate™

will not run when
attached.

1. Carpet pile or strings entangled

2. Worn or broken belt.

1. Clean agitator.

2. Not a serviceable item, return to

Sears store or service center for

replacement if under warranty.

Pet

Handi

Mate™ does

poor job of dirt
pick-up.

1. Carpet pile or strings entangled

2. Worn or broken belt.

1. Clean agitator.

2. Not a serviceable item, return to

Sears store or service center for

replacement if under warranty.

-

25

-

Advertising