Extension hose assembly, Power cord, A warning – Kenmore ASPIRADORA 116.31591 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EXTENSION HOSE ASSEMBLY
1. While aligning tabs on extension hose
assembly to corresponding slots in lower
hose port, insert extension hose assembly
into lower hose port.
Extension
Hose
Assembly
Tab
2. Rotate extension hose assembly as
shown until it locks into place.
3. Push extension
hose handle into
extension hose
holding bracket.
POWER CORD
1. Make sure that the upper cord hook is
rotated in the upright position as shown.
2. Wrap power cord loosely around cord
hooks.
3. Lock power cord plug onto the power
cord.
A WARNING
Electrical Shock and Personal Injury
Hazard
Wrapping the cord too tightly puts stress
on the cord and can cause cord damage.
A damaged cord is an electrical shock
hazard and could cause personal injury
or damage.
Power Cord
Plug
Lower
Cord
Hook
-
7
-