Kenmore 790.4662 - Manual (Page 19)

Setting Oven Controls (con’t)
Setting Preheat
The PREHEAT pad controls the Preheat feature. The Preheat feature will bring the oven up to temperature
and then indicate when to place the food in the oven. Use this feature when recipes call for preheating. Preheating is
not necessary when roasting or cooking casseroles. The oven can be programmed to preheat at any temperature
between 170°F to 550°F.
INSTRUCTIONS
To set the Preheat temperature (example: 350°F)
1. Arrange the interior oven racks.
2 . Press and "BAKE" will appear in the display
(Figure 1).
3. Press
(D CD ®
" will appear in the display
(Figure 2).
PRESS DISPLAY
4. Press (S ta ^. "PRE" and "BAKE" will appear in the display as
the oven heats and reaches 350°F (Figure 3).
Note: After the oven has reached the desired temperature (this
example, 350°F) the control will beep and the "PRE" light will turn
off and oven temperature will be displayed (Figure 4). If you
missed hearing the beep, you can tell that the oven has reached
preheat temperature if you see the oven temperature showing in
the oven display. Once the oven has preheated, place food in the
oven. The "BAKE" light will stay on.
Press when baking is complete or to cancel the preheat
process.
To change Preheat temperature while oven is
preheating (example: changing from 350°F to 425°F)
If it is necessary to change the preheat temperature while the oven
is preheating to the original temperature:
1. While preheating, press and "BAKE" will appear
in the display (Figure 5)
2. Enter the new preheat temperature. Press
CD CD CD
"425°" and "BAKE" will appear in the display (Figure 6 ).
3. Press "PRE" and "BAKE" will appear in the display as
the oven heats to 425°F (Figure 7). A beep will sound once the
oven temperature reaches 425°F and the display will show
"425°" and "BAKE (Figure 8 ).
4. When baking is complete press
CDCDCD
CD CD CD
Figure 1
3S0‘
Figure 2
Figure 4
Figure 5
Figure 8
19