Removable top rack, Divided tines, No-flip clips – Kenmore 665.1649 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Removable Top Rack

The removable top rack allow/s you to wash larger items
such as stock pots, roasters, and cookie sheets in the bottom
rack.

Puli the rack forward slightly to access clips.

While pressing the ridges in, push back on the clip until the
outer side releases. Slide the clip to the inside of the track
edge to remove the clip.
After removing both clips, puil rack out.

To replace the top rack

1. Place the rollers on each side of the rack into the rack tracks

and push the rack back.

Align the open side of the clip with the inside edge of the rack
track.

Push the ridges and slide the ciip toward the outside rack

edge until it locks into place.

Repeat on the other side.

Puli the rack out all of the way to ensure clips are fuily seated.

3.

Divided tines

The row of tines on the right-hand side of the top rack can be
adjusted to make room for a variety of dishes.

To adjust the front half

1. Grasp the tip of the tine that is in the tine holder.

2. Gently push the tine out of the tine holder.

3. Move the tines to the left to make room for larger dishes.

Move the tines to the right to wedge plastic or other

lightweight items against the side of the rack.

To adjust the back half

1. Grasp the tip of the tine that is in the tine holder.

2. Gently push the tine out of the holder.

3. Lay the tines down, toward the center of the rack.

No-flip clips

The no-flip clips hold lightweight plastic items such as cups, lids,

or bowis in place during washing.

To move a clip

1. Pull the clip up and off the tine.

2. Reposition the clip on another tine.

The bottom rack is designed for plates, pans, casseroles, and

utensils. Many items, up to 13 in. {33 cm) tall, fit in the bottom
rack. (See recommended loading patterns shown.)

NOTE: The features on your dishwasher rack may vary from the
drawings shown.

10 place setting

m

Do not load glasses, cups, or lightweight plastic items in the

bottom rack. Load smail items in the bottom rack only if they
are secured in place.

■ Load plates, soup bowls, etc., between tines.

■ Overlap the edges of plates for large loads.

■ Load soup, cereal, and serving bowls in the rack in a variety

of ways depending upon their size and shape. Load bowls
securely between the rows of tines. Do not nest bowls
because the spray will not reach all surfaces.

12 place setting

m

Load cookie sheets, cake pans, and other iarge items at the

sides and back. Loading such items in front can keep the

water spray from reaching the detergent dispenser.

10

Advertising
This manual is related to the following products: