Setting oven controls, Instructions press display, To activate the oven lockout feature – Kenmore 790.7889 User Manual

Page 15: To reactivate normal oven operation, N i nr

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Setting Oven Controls

Oven Lockout

Temperature Display

Setting Oven Lockout Feature

The (s) pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door, prevents the

Warmer Drawer and most oven controls from being turned ON. It does not disable the clock, Kitchen Timer or the interior
oven light.

INSTRUCTIONS

PRESS

DISPLAY

To activate the Oven Lockout feature:

1. Press and hold (gj for 3 seconds (Fig. 1).

2. After 3 seconds a beep will sound, LOG & "DOOR LOCKED"

will flash in the display. Once the oven door is locked the

"DOOR LOCKED" indicator will stop flashing.

To reactivate normal oven operation:

1. Press and hold (^) for 3 seconds. A beep will sound. LOC will

clear. The "DOOR LOCKED" will continue to flash until the oven
door has completely unlocked (See Fig. 2).

2. The oven is again fully operational.

(S) for 3 seconds

(S) for 3 seconds

□ n I nr

■ D u L U L

Fig. 1

Fig. 2

Setting Temperature Display — Fahrenheit or Celsius

The BROIL “ and CLEAN dSn pads control the Fahrenheit or Celsius temperature display modes. The oven control can

be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in
Fahrenheit.

INSTRUCTIONS

PRESS

DISPLAY

To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit:

1.

2

.

3.

To tell if the display is set for Fahrenheit or Celsius press

b

i

(Fig. 3) and hold for 7 seconds; "550°" will first appear in the
display and then a beep will sound. If "F" appears, the display
is set to show temperatures in Fahrenheit (Fig. 4). If "C"
appears, the display is set to show temperatures in Celsius
(Fig. 5).

Press Am to switch between Fahrenheit or Celsius display

modes. The display will show either "F" (Fig. 4) or "C" (Fig. 5).

Press to accept the change or press (^) to reject the

change.

b

i

for7seconds

j n r r n

J U D J U

Fig.3

Fig. 4

or (^)

Fig. 5

15

Advertising
This manual is related to the following products: