Kenmore 790.7889 - Manual (Page 23)

The CONV ROAST pad is designed to give optimum cooking performance for this feature. The Convection Roast pad
combines a cook cycle with the convection fan and element to roast meats and poultry. Preheating is not necessary for
meats and poultry. Heated air circulates around the food from all sides, sealing in juices and flavors. Foods are crispy brown
on the outside while staying moist on the inside.
Setting Oven Controls
• Setting C onvection R oast
Setting Convection Roast
INSTRUCTIONS PRESS
To set the Convection Roast feature (example for
Meats to cook at 350°F):
1. Arrange interior oven racks and place food in oven.
2. Press R om . "CONV" will flash and " — w i l l be displayed (See
Fig.i)^ ^
3. Press "CONV" and "350°" will appear in the display
(See Fig. 2). The convection fan icon will turn on.
Press (s) to stop Convection Roast at any time. (g)
Note: Please allow the convection fan 6 minutes to activate. When the
convection fan activates, a rotating fan icon will appear in the display
(See Fig. 3) This rotating fan icon indicates when the convection fan is
operating.
Roasting Rack Instructions (some models)
When preparing meats for convection roasting, use the broiler pan and insert along with
the roasting rack. The broiler pan will catch grease spills and the insert will help prevent
grease splatters. The roasting rack will allow the heat to circulate around the meat.
To prevent food from contacting the broil element and to prevent grease
splattering, DO NOT use the roasting rack when broiling.
DISPLAY
D f l j r n '
■ J U JJU
Fig. 1
■ j n
■ J U J J U
Fig. 2
1. Place oven rack on bottom or next to the bottom rack position. See Arranging Oven
Racks in the Before Setting Oven Controls section.
2. Place the insert in the broiler pan. The roasting rack fits on the insert allowing the
heated air to circulate under the food for even cooking and helps to increase
browning on the underside. Make sure the roasting rack is securely seated on the
insert in the broiler pan. DO NOT use the broiler pan without the insert. DO NOT
cover the insert with aluminum foil.
3. Position food (fat side up) on the roasting rack (See Fig. 3).
4. Place the broiler pan on the oven rack.
IT»
(T:
■
23