Seif-cleaning, Instructions press display, 00 to 4:00 using number pads – Kenmore 790.7889 User Manual

Page 32: Du lln, O n n, O n r i, Instructions

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Seif-Cleaning

Setting Flex Clean

Setting Delay Flex Clean

The FLEX CLEAN cS™ pad is used to start a Self-Cleaning cycle. When used with the DELAY START (S) pad, a delayed

Self-Cleaning cycle may also be programmed. The FLEX CLEAN feature allows for any Self-Cleaning cycle time from 2
(2:00) to 4 hours (4:00) to be selected. You may also choose the clean time in 1 minute increments (for example 2 hours

and 50 minutes) by pressing the number keypads

(D(D®.

During the Self-Cleaning cycle, the outside of the range can become very hot to the touch. DO NOT leave

small children unattended nearthe appliance.

DO NOT force the oven door open. This can damage the automatic door locking system. Use care when

opening the oven door after the Self-Cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or
steam to escape. The oven may still be VERY HOT.

INSTRUCTIONS

PRESS

DISPLAY

To start an immediate Self-Cleaning cycle or to set a delay start
time of 9:00 o’clock and shut off automatically (example

provided is a default 3 hour Self-Clean cycle):

1. Be sure the clock is set with the correct time of day, the oven

is empty and the oven door is closed.

j n n

J u u

u

l l d

LEAN 3

2:00 to 4:00 using

number pads

Fig. 1

■ o n n

D U L L n

KED CLEAN 3

Fig. 2

2. Press i . "CLEAN" will flash, "3:00" (hours) and the Cooktop

locked icon will show in the display (See Fig. 1). 2-4 hours of
Self-Cleaning time may be choosen by pressing any amount of

time from @@® (2 hours) through ®®® (4

hours) in one minute increments. You may also skip the time
entry and accept the default cleaning time of 3 hours by
pressing the Start key pad (See Step 3).

Press .The "DOOR LOCKED" icon will flash; "CLEAN",

Cooktop Lockout icon and the letters "CLn" will remain on in
the display (Fig. 2).

As soon as the control is set, the motor driven oven door lock
will begin to close automatically. Once the door has been

locked the "DOOR LOCKED" indicator light will quit flashing
and remain on. The Cooktop locked icon will remain on (Fig. 3).

NOTE: If the optional delay Self-Clean feature is needed, finish steps 5-7. If Self-Clean is started immediately skip the remaining

steps and continue with “When the Self-Clean cycle is done” on the following page.

3.

4.

o n r i ^

' D u L L D _

(ED CLEAN 3

Fig.3

5. Press (®) (See Fig. 4). Enter the desired Self-Clean starting

time using the number pads ®®® (See Fig. 5).

Press

"CLn" icon will turn off; "DELAY", "DOOR

6

.

7.

LOCKED", "CLEAN" and Cooktop locked icons will remain on.

The control will calculate forward from the set start time to
determine when the Self-Cleaning cycle should end. The Self­
Cleaning cycle will turn on automatically at the set time. At that
time the icon "DELAY" will go out; the oven icon will come on,
the start time. Cooktop locked icon, "CLEAN" and "CLn" will

remain in the display (See Fig. 6).

-

i i n

DELAY Q

DOOR LOCKED CLEAN UJ

Fig. 4

_o nn

r i

D U U L L D

DELAY n

DOOR LOCKED CLEAN iD

Fig. 5

i-DH

n

l-DU LLD

DOOR LOCKED CLEAN 3

Fig. 6

32

Advertising
This manual is related to the following products: