Water flow through the softener, Fig. 37, Faceplate timer features – Kenmore 625.38356 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Faceplate Timer Features

4. Press SELECT again to show the following

RECHARGE display.

EXAMPLE: Set to 4 days maximum between
regenerations.
Maximum Days Between Regenerations: The face
plate timer automatically controls regeneration fre­
quency. This provides the greatest operating efficiency,
and under most conditions this feature will be left in its
default mode. However, you can modify this feature if

you want to force a regeneration every set number of
days. For example, if your water supply contains iron
and you want the softener to regenerate at least once
every few days to keep the resin bed clean, set the dis­

play as typically shown above. Setting is available from

1 to 6. Press SELECT to return to the present time is

play.

5. Press SELECT to show the 97% display.

97% Feature: The 97% Feature can save salt and
water by regenerating when 97% of the softener’s
capacity has been used up. With this feature ON, the

regeneration can occur at any time (whenever the sys­

tem has reached 97% of its capacity). The default is
OFF. If this feature is desired, turn it on by pressing the

UP button.
IntelliSoft is a new Kenmore exclusive technology built
into your system’s electronic control. IntelliSoft
ensures that your softening system provides you with

the most accurate salt dose to fit your water use

needs, providing you with industry leading water and
salt savings.

6. Press SELECT to show the 12 HOUR display.

12 or 24 hour clock: All time displays are shown in
standard clock time (1 to 12 PM; and 1 to 12 AM) at

the 12 hr default setting. If Military time displays are
desired, set to 24 hr by pressing the UP button.

WATER FLOW THROUGH THE SOFTENER

If soft water is in use, the water flow bars continually

scroll across the display. The bars scroll slowly when
water flow is slow, and move faster as water flow increas­
es. The flow bars do not show when all faucets and water
using appliances are off.

I I

DAY

I

DAY

RECHARGE

RECHARGE

Default Display

Example:

Set to 4 Days Maximum

Between Regeneration

.. _

I IL L

I I I

LI I I

I I

RECHARGE

RECHARGE

|-|L

AM

PM!-„

I l_ I II

PM

L II II

TIME

TIME

ingo'

luda

ingo'

luda

Flow bars scroll when

soft water is in use.

1038'

FIG. 37

Questions? Call The Kenmore Water Line 1-800-426-9345

24

Advertising
This manual is related to the following products: