D. typical threaded in and out pipes to softener, Deluxe valve models, Plan your installation – Kenmore 180 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SECTION 2
PLAN YOUR INSTALLATION
D. TYPICAL THREADED IN AND OUT PIPES TO SOFTENER
FIG. 5
If you are planning a threaded plumbing installation, with a 3-valve bypass, use the
drawing in Fig. 4 as a guide. Use union fittings, as needed, to connect the plumbing.
DELUXE VALVE MODELS
*NOTE:
For 1 in. plumbing connection,
use
a 1 In. threaded straight connector.
2 - 5
Deluxe Valve
Advertising