Caution, Plan your installation, Fig. 4 high performance valve models – Kenmore 180 User Manual
Page 30: 4high performance valve
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2
PLAN YOUR INSTALLATION
C. TYPICAL SOLDERED COPPER (OR PVC) IN AND OUT PIPES TO SOFTENER
FIG. 4
HIGH PERFORMANCE VALVE MODELS
IN AND OUT PLUMBING USING
A 3-VALVE BYPASS
IN AND OUT PLUMBING USING
SEARS BYPASS VALVE (Included)
P
aro
W
ater
FITTINGS
REQUIRED, NOT
IDENTIFIED
IN
90“ elbow (2)
1 ” NPT sweat adaptor (2)
pips (as required)
- threaded adaptor
- o-ring seal
2 of each
included
Bypass Valve
(included with some
models)
To connect to 1 -1/4"
copper household
plumbing
Available from Sears
see Owner’s Manual for pari numbers
NOTE;
For plumbing connection, buy 2
sweat adaptors and plumb directly to
the inlet-outlet adaptors or bypass
valve.
Threads
on
the
Inlet-outlet
adaptors and bypass valve are 1 ” NPT.
CAUTION:
DO ALL SOLDERING BEFORE
CONNECTING SWEAT ADAPTOR
TO INLET-OUTLET ADAPTORS
OR BYPASS VALVE.
To connect to 1 -1/4”
copper household
plumbing
Available from Sears
see Owner’s Manual for part numbers
2
-
4
High Performance Valve