Compaq MP2800 - Manual (Page 17)

Getting Started 17
Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group
Pages: 18 Words: 2766 Saved date: 09/22/0010:37 AM File Name: Ch01.doc
3. To lower the display angle, press the elevator button again and
press down on the projector to lower it.
CAUTION: Failure to press the elevator button
before adjusting the elevator foot can result in
damage to the elevator mechanism.
Adjusting the Projector Focus
To focus the projected image, rotate the focus ring ➊ until the
image is clear. The projector will focus at distances from 3.74 (1.14
meters) to 32.8 feet (10 meters).
If vertical bars appear on the display after adjusting the focus, press
the
Resync
button ➋ to automatically synchronize and track the
display. If the button does not correct the display, use the Digital
Conversion feature in the on-screen menu to manually adjust the
synchronization and tracking. Refer to the “Adjusting the On-
Screen Menus” section in Chapter 2.