Compaq MP2800 - Manual (Page 57)

Agency Regulatory Notices 57
Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group
Pages: 4 Words: 680 File Name: Agency Regulatory Notices Saved date: 09/22/00 10:04 AM
The power cord must be rated for the product and for the
voltage and current marked on the product’s electrical ratings
label. The voltage and current rating of the cord should be
greater than the voltage and current rating marked on the
product. In addition, the diameter of the wire must be a
minimum of 0.75 mm 2 or 18AWG, and the length of the cord
must be between 6 feet (1.8 m) and 12 feet (3.6 m). If you have
questions about the type of power cord to use, contact your
Compaq authorized service provider.
A power cord should be routed so that it is not likely to be
walked on or pinched by items placed upon it or against it.
Particular attention should be paid to the plug, electrical outlet,
and the point where the cord exits from the product.