Setting up the projector – Compaq MP2800 User Manual
Page 7
Getting Started
7
Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group
Pages: 18 Words: 2766 Saved date: 09/22/0010:37 AM File Name: Ch01.doc
If your shipping box does not contain all of the listed items, please
contact your Compaq authorized dealer, reseller, or service
provider.
Setting Up the Projector
Follow the instructions below and on the following pages to set up
the projector. Separate setup instructions are described for the
following products:
n
Portable computers
n
Desktop computers
n
Compaq PC Companions with VGA capability
n
Videocassette recorder, DVD, or camcorder (requires optional
Multimedia Video Adapter)
✎
The projector is hot pluggable and can be connected
to any video input source while the source is in use.
IMPORTANT:
Place the projector on a stable desk or table at a
distance not less than 3.74 feet (1.14 meters) and not greater than
32.8 feet (10 meters) from the projection screen.
!
WARNING:
To reduce the risk of electric shock or
damage to your equipment:
n
Do not disable the power cord grounding plug.
The grounding plug is an important safety
feature.
n
Plug the power cord into a grounded (earthed)
electrical outlet that is easily accessible at all
times.
n
Disconnect power from the projector by unplug-
ging the power cord from the electrical outlet.
n
Do not place anything on power cords or cables.
Arrange them so that no one may accidentally
step on or trip over them. Do not pull on a cord or
cable. When unplugging from the electrical
outlet, grasp the cord by the plug.