Prepare unit, Remove all packaging materiai and discard, Remove drawer and set aside – Bosch L0609466 User Manual

Page 7: Remove oven door and set aside, Preparation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Installation

Preparation

Prepare Unit

Remove all packaging materiai and discard.

Tip:

Place the range on a piece of the cardboard to protect floors.

Remove drawer and set aside.

1. Pull drawer all the way out.

2. Locate locking clips on the rails, one on each side.

3. Push up on the clip on the left rail. Pull the drawer out until clip locks into

place.

4. Push down on the clip on the right rail. Pull the drawer out until clip locks into

place.

5. Pull the drawer straight out and set aside.

6. Push rails into range.

Remove oven door and set aside.

A

Warning:
When removing the door:

Make sure oven is cool and power to the oven has been turned off before removing the door. Failure

to do so could result in electrical shock or burns.

The oven door is heavy and fragile. Use both hands to remove the oven door. The door front is glass.

Handle carefully to avoid breaking.

Grasp only the sides of the oven door. Do not grasp the handle as it may swing in your hand and
cause damage or injury.

Failure to grasp the oven door firmly and properly could result in personal injury or product damage.

To avoid injury from hinge bracket snapping closed, be sure that both levers are securely in place
before removing door. Also, do not force door open or closed - the hinge could be damaged and
injury could result.

i

1. Be sure to read the above WARNING before attempting to remove oven door.

2. Open the door all the way.

3. Flip levers on hinges (one on each side) toward you.

Figure 3: Hinge Positions

English 5

Advertising