Kenwood MS-A5 - Manual (Page 13)

HL'JJHII.JJ^IUA'>1 UfjjIyi» ■..vr*r^trr^7" .......... ........... ..................... »
# çurrent time €m the clock
This unit has a built-in clock. As soon as you start using the unit, you
should set the current time on the clock in order to ensure that the timer
functions work properly.
In the event of a power failure, or when the plug has been removed from
the power outlet, the clock display will blink to indicate that the time
should be reset.
Note: the timer cannot be used unless the time has been set.
First of all, press the POWER key to turn on the power.
Press the CLOCK SET key.
CLOCK SET
c V'
iWj / /
l ;
Ns?
Time display will blink.
Use the and keys to set the time.
DOWN TUNING
Press the CLOCK SET key again.
CLOCK SET
c:
To increase the minute setting, press the UP key once. The
minute setting will increase 1 minute each time the key is
pressed. Holding the key down will cause the minute and
hour settings to increase quickly,
To decrease the minute setting, press the DOWN key
once. The setting will decrease 1 minute each time the key
is pressed. Holding the key down will cause the minute and
hour settings to decrease quickly.
When the current time has been set, press the "CLOCK
SET" key again.
---------™--------------
/seu
^ The time^splay will stop blinking.
g with ^
Insert the miniplug on the headphones into the
PHONES jack on the unit. Use headphones
equipped with a stereo miniplug, or use a stereo
miniplug adaptor.
The sound from the speakers will be cut off.
Use the VOLUME dial to adjust the volume.
OME-TOUCH OPERATION System
This unit is designed so the power will automatically go on and operation will begin when the TAPE, TUNER, CD, [>i|, 01
#
iS
Itey on the unit, or the CD/TAPE key on the remote control unit is pressed