Ocrs function description, Select the cd input, Ccrs edit recording – Kenwood MS-A5 User Manual

Page 26: Track mode, Program mode

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

OCRS function description

The OCRS {Computer-Controlled CD Recording System)
makes the following convenient recordings possible by set­
ting the optimum tape recording level for the specific CD to be

recorded and starting recording automatically.

Preparations

Insert a cassette tape.

CD Select reverse mode (either to record both

sides once or to record one side only).
Select DOLBY NR if desired.

CD Select the direction of tape movement: A

(forward) or B (reverse).

CD Insert the CD to be recorded.

Select the CD input.

To program desired tracks, set the unit to program mode.

To edit desired tracks, set the unit

After selecting the CD input, press
stop the operation.

in the CD section to

CCRS EDIT recording

If the actual length of the tape is longer than the recording

time entered in EDIT mode:

After recording of the tunes for side A is completed, the
tape is forwarded to the end of side A and recording
starts again at the beginning of side B.

If the actual length of the tape is shorter than the recording

time entered in EDIT mode;

The tracks still remaining at the end of side A are left
unrecorded, and recording at the beginning of side B

starts with the first track edited for side B.

Press the CCRS key

When the fcCRS

I

key is pressed, the

CD is played and the optimum re­
cording level is selected automati­
cally. After the recording level is set,
recording automatically starts. When
recording reaches the end of side A

of the tape, the tape automatically
reverses and continues recording on
side B.

CCRS setting is canceled by pressing the lid

"±"

button of the CD player.

During CCRS operation, keys other than on the CD player, "DISPLAY", and on the cassette deck do not function.

Track mode

A 10-second space

Program mode

■ Starts from a post- -

tion 10 seconds
before the point
where the tape is
reversed.

A 10-second space is in­
serted after the tape di­
rection reverse.

Erased if the length is

' 5 minutes or less.

^1 A

J 1 B 1

1 c

space ""

^

1 C 11 A ll B

F II

E IL...D II

c ^

i ,CJ 1 .D 1 1 F 1

I| E.J I

[f the length of the last tune

on sida B is iess than 5 min­
utes, that tune is erased.

The tune interrupted at

the end of side A is re­
corded from the begin­
ning,

D

Auto
reverse

A 10-second space
is

inserted

after

the tape direction
reverse.

Advertising