Uniden UBC3000XLT User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Charging the Battery
Use the AC Adaptor/Charger to power the
UBC3000XLT from an AC outlet.
Warning! Use only the supplied AC
adaptor/charger. Other external power
sources could cause overheating or
damage the scanner oircuits.________
Notes:
■ It takes 1 4 - 1 6 hours to fully charge
the battery.
■ You can operate the scanner while
the battery charges.
■ Disconnect the adaptor/charger
during a power failure.
See also, “Battery Maintenance" on
Page 40.
Attaching the Antenna
To remove, lift where marked. Push in
direction of arrow.
Advertising