Troubleshooting, Problem possible solutions – Uniden UBC3000XLT User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting
If your scanner is not working properly, try the solutions listed below.
Problem
Possible Solutions
Scanner doesn’t
work at all
• Be sure the battery is installed and properly
charged.
• Check the AC adaptor/charger connections.
• Be sure the scanner is turned on.
Poor reception
• Check the antenna connection.
• Move the scanner to a different location.
Scan won’t stop
• Adjust the SQUELCH cohtrol,
• Check the antenna connection.
■ Trv a search. All channels might be inactive.
Scan won’t start
• Be sure the selected banks have channels
programmed.
• Adjust the SQUELCH control.
Problem
Possible Solutions
Search won’t
start
• Adjust the
squelch
control.
Keypad won’t
work
• Check the Keypad Lock feature
If you still cannot get satisfactory results, and want more
information, or if you want to return the scanner for service, call or
write to Uniden Service Division. The address and phone number
are listed in the Warranty at the end of this Operating Guide.
41