Additional scanner features, 0^ w s a, 8b8 scrfi – Uniden UBC3000XLT User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Additional Scanner Features
Using Data Skip
Some frequencies carry un-mod ulated
signals or data signals (such as pager
preamble signals). If your scanner detects
such a signal during scanning or searching,
it remains on the channel or frequency and,
after three seconds, resume SCAN or
SEARCH.
You can set the scanner to continue
scanning after a 3-second delay, when it
encounter such signals.
Note: Data Skip is not available for the AM
band and is not active during Priority scan.
Note: You can turn Dafa Skip on or off at
any time during scanning.
To turn on Data Skip while scanning:
«MR M I
SCAN '
8B8 SCRfi
Press ■
s @ © ® ®
^
0 o’" ® ©
"0^ W S A
HR*
WFW
S B 0 B @
SANK
SCAN
'
888 5Cnn
The scanner defauits to Data Skip in the
Search Mode.
18H888.889
S RK
e
NF«
if you want to disable Data Skip during search:
0 0 @ ©
B 0 o’"®" ©
0^ ^ 0 A
__ __ M NFM WFM
0 0 0 0 0
Press ■
SANK t
IRCMA
l38?,88d.988
i
KH> NFy
34