Uniden UBC3000XLT User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Select the channel.
- ‘The Manual Mode” on Page 32.
- “The Scan Mode" on Page 20.
Locking a Channel While Scanning
If the scanner keeps stopping on a particular
channel due to noise or too-frequent
transmissions, you may want to keep that
channel from scanning.
1. Wait until the scanner stops at the channel.
For more information, see
aAHn
SCAN
8 0
12.S KKi
H f U
2. Then:
The scanner immediately resumes scanning
because that channel is no longer in the
scanning sequence.
Unlocking a Channel
Note: Empty channels are automatically
locked. You cannot unlock an empty
channel.
1. Enter the Manual Mode,
Press ■
©
© ©
©"
&SAVE
]7
IS
B
B @
® ©
_ _ SffT
0
B G
® ©
Note: Because the channel is
locked-out, you cannot use the Scan
Mode to select it.
22