Connecting wires to terminals, If you want to connect kca-s220a, Control unit – Kenwood KCA-SR50 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Connecting Wires to Terminals
If you want to connect KCA-S220A
Control unit
KCA-SR50
• Connect the KCA-SR50 to the terminal labelled TO CHANGER 2.
A
• Please keep the total extension of the control cable from the control unit to the disc changer to 13 m or less. Control cable
lengths in excess of 13 m will cease to function properly.
8 I
English
Advertising