Installation, Installation using the self-tapping screws, Installation using the velcro tapes – Kenwood KCA-SR50 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
A
Install the unit in a well-ventilated location and do not place
objects on top of it.
When installing to the car, the unit should be securely
fastened at a location that will not interfere with driving.
When making a hole in the chassis, check that the gas tank,
break pipe, wire harness, or other part is not located on the
other side, and be careful not to cause scratches.
Installation using the self-tapping
screws
Accessoryd)
(04
X 12 mm)
Installation using the velcro tapes
Accessory (2)
Carpet
A
Please do not install the unit near the dashboard, the rear
tray, or other important components. Doing so could lead
to injury or accident should the unit come off due to a
shock and strike a person or an important component.
Tapping screws should be used for mounting. (Attachment
with velcro strips, although easy, can come off with a
shock.)
English