Receiving) – Kenwood TS-850S User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(RECEIVING)
rn Turn on the DC power supply and then turn the transceiver’s power switch ON.
0 A frequency is shown in the display.
Press the UP/DOWN switches to select the desired frequency within the 28 MHz amateur radio band.
When the 1 MHz step position is selected, the MHz indicator will light.
0 Select FM with the MODE key.
Turn the AF gain control clockwise until a signal or noise is heard.
^ To eliminate the no signal noise turn the SQL control clockwise to the point the background noise just disappears.
This point is known as the squelch threshold point.
[T] Rotate the TUNING knob and select an open channel.