Kenwood TS-850S - Manual (Page 77)

7. OPTIONAL ACCESSORIES
Be sure to unplug the DC power cable before
starting work.
7-1. FILTER INSTALLATION
1. Remove the bottom cover of the transceiver.
2. Remove the screws and the filter cover as shown.
o
YK-88C-1 or
YK-88SN-1
O
p.yp
i
I Tn I
I II
I-O il
I I L<2)
o
''■e tf-
YK-88CN-1 or
YK-88SN-1
■ YG-455C-1
or
YG-455CN-1
■O'
O
Notes
1. Avoid catching your fingers or the wiring
harness when closing.
2. When the YK-88SN-1 and YG-455CN-1 are
installed, 500 or 270 is displayed for the YK-
88SN-1, and 500 is displayed for the YG-
455CN-1. They are different from the actual
bands.
7-2. VS-2 VOICE SYNTHESIZER
INSTALLATION
1. Remove the top cover of the transceiver.
2. Plug the 8-pin connector onto the VS-2.
3. Use the three screws supplied with the VS-2 to
install the VS-2 on the chassis.
Caution
Keep the pan-head screw and cushion provided
with the VS-2 for later use. They are not needed
now.
3. Attach the filter(s) and secure it with the supplied
screws. The filters are not polarized so they may
be placed in either direction.
4. The desired filters can be arranged matching the
number of the filter switch to the number of the
installation for each filter.
CN
] - YK-88
C -YG-455
VS-2
4. Replace the top cover.
5. Replace the bottom cover.
67