Canon CDI-E151-010 User Manual
Page 128
126
9. Additional Features
4
Turn on the TV and switch it to Video
mode.
5
Power the camera into Shooting
mode or Playback mode (p. 21).
z The image will appear on the TV. Shoot or play
back images as usual.
No image will appear on the LCD monitor when
the camera is connected to a TV monitor.
The video output signal can be switched
(NTSC or PAL) to accommodate different
regional standards. The default setting will vary
between regions.
NTSC: Japan, U.S.A., Canada, Taiwan, etc.
PAL:
Europe, Asia (excluding Taiwan),
Oceania, etc.
If an incorrect video system is set, the output
image will not display properly.
If the TV is a stereo model, you can plug the
audio plug into either the left or right Audio In
jack. Please refer to the TV's manual for details.
A TV set cannot be used in the
(Stitch
Assist) mode.