Canon CDI-E151-010 - Manual (Page 146)

144 Appendix
Using the Wireless Controller (Sold Separately)
Installing the Battery
Install the battery (CR2025) into the Wireless
Controller WL-DC100 (sold separately) before use.
1
Place your fingertip
on
a and press it in
the direction of the
arrow while placing
another fingertip on
b and removing the
battery holder.
2 Place the battery in
the battery holder
with the negative
terminal (-) facing
up. Then replace the
battery holder into
the wireless controller.
Warning
Be particularly careful to keep the battery out of the reach
of children. Seek medical assistance immediately if a child
swallows a battery since corrosive battery fluids could
damage the stomach or intestinal wall.
Negative
terminal
(-)
Removing the Battery
To remove the date battery, pull
it in the direction of the arrow.
Shooting/Playback
The wireless controller can be used to shoot or play
back. The wireless controller can be operated from
an approximate distance of up to 5 m (16.4 ft.) from
the front remote sensor.
If you ever dispose of your camera, first
remove the date battery for recycling
according to the recycling system of your
country.
Bij dit produkt zijn batterijen
geleverd. Wanneer deze leeg
zijn, moet u ze niet weggoolen maar inleveren als KCA
Transmitter
Remote Sensor