Canon CDI-E151-010 - Manual (Page 26)

24 1. Preparing the Camera
Setting the Date/Time
The first time the camera power is turned on or
whenever the built-in rechargeable lithium
battery charge is low, start from Step
.
Š Setting the date and time settings does not
cause the date/time stamp to appear on
images. For printing images with the date on
them, refer to the Direct Print User Guide or
Software Starter Guide.
Charging the Date/Time Battery
Š The camera has a built-in rechargeable lithium
battery that maintains the date, time and other
camera settings. This battery recharges when the
main battery pack is inserted into the camera.
When you first purchase the camera, place a
charged battery pack in it or use the AC Adapter
Kit ACK700 (sold separately) for at least 4 hours
to charge the date/time battery. It will charge even
when the camera power is set to Off.
Š If the Set Date/Time menu appears when the
camera power is turned on, it means that the
date/time battery charge is depleted. Recharge
it as described above.
You may need to reset the date and time if the
battery pack is removed for about three weeks.
aTurn the power on (p. 21).
bPress the MENU button, and then the
X arrow on the omni selector.
The [ (Set up)] menu appears.
b