Canon CDI-E151-010 - Manual (Page 153)

Appendix 151
Camera Care and Maintenance
Use the following procedures to clean the camera
body, lens, viewfinder, LCD monitor and other parts.
Camera body : Wipe the body clean with a soft cloth or
eyeglass lens wiper.
Lens : First use a lens blower brush to remove dust
and dirt, then remove any remaining dirt by
wiping the lens lightly with a soft cloth.
zNever use synthetic cleansers on the
camera body or lens. If dirt remains,
contact the nearest Canon Customer
Support Help Desk as listed on the
separate Canon Customer Support leaflet.
Viewfinder
LCD Monitor : Use a lens blower brush to remove dust and
dirt. If necessary, gently wipe the viewfinder
and LCD monitor with a soft cloth or an
eyeglass lens wiper to remove stubborn dirt.
zNever rub or press forcefully on the LCD
monitor or viewfinder. These actions may
damage them or lead to other problems.
Never use thinners, benzene, synthetic
cleansers or water to clean the camera. These
substances may distort or damage the
equipment.