Uniden UST-9000 - Manual (Page 5)

Remote Control
^Remote Control (UST-699)
^■i^osed Keys
XI. Power On/Off - Turn the receiver on or off with this
key.
X2. 0 - 9 Keys - Press to select channel or station number.
X3. Mute Key - Press to mute volume. Press again to
restore volume.
X4. Channel Up/Down Keys - Press once to change
channel. Press more than 1/2 second to change 8
channels per second. Release key to stop.
X5. Volume Up/Down Keys - Select the volume by
pressing or holding, up/down keys
Hidden Keys - lift cover to access keys
X6. N/W Key - Press to change the audio band from wide
to narrow or narrow to wide.
X7. Mode Key - Press to change the audio mode from
mono to discrete, matri,x, and back to mono.
X8. Audio 1 Keys - Adjust the frequency of the first
audio channel from 5 - 8.5 MHz. Press once to step 10
KHz, press more than 1 /2 second to change 80 KHz per
second. Initial setting is 6.8 MHz for all channels.
X9. East and West Keys - Press once to change anten­
na position by one number. Press and hold to move
antenna until key is released.
Type Key - Select the type of satellite. Operation is
the same as No. key.
<11. Preset Video Key - Press to activate the video sta­
tion mode for easy access to your favorite channels.
XI2. Preset Audio Key - Press to activate the audio
station function for easy access to your favorite satel­
lite radio programs.
XI3. DNR Key - Press to turn Dynamic Noise Reduction
on or off.
X14. C/KuBand - Press to select either C band or Ku band
satellite signals. For Ku band reception a Ku band LN8
is required.
XI5. Audio 2 Keys - Adjust the frequency of the second
audio channel. Operation is the same as audio 1. Initial
setting is 6.8 MHz for all channels.
XI6. Video Fine - f / - - Primarily for Ku band reception.
Adjust the first local frequency to fine-tune the video.
Press once to change 156.25 KHz, press and hold to
rapidly change by 800 KHz/second. Release to stop.
Some C band channels may also need to be fine-tuned
by pressing the -F or - key momentarily.
XI7. No. Key - Select satellite number. Press once to select
next number. Press for more than 1/2 second to
change 4 numbers per second.
XI8. Caii Key - Press to move antenna to satellite and
channel shown in display.
XI9. Battery Compartment - Remove cover to replace
2 AA size batteries.