JVC SP-PWC60 - Manual (Page 12)

Connections Do not connect the power cord until all other connections have been made.
Connecting the satellite (front,
center, surround) speakers
■ Assembling the speakers — ТН-С60ЯН-С50
■ For TH-C60: Assemble front speakers and surround speakers.
■ For TH-C50: Assemble front spe;ikers.
For the surround speakers of TH-C50, see “Connecting the
surround speakers — TH-C50”. (See page 10.)
For TH-C60
Front speaker
(SP-THC60F) (2)
Surround
speaker
(SP-THC60S) (2)
Stand (4) Base plate (4)
• Check file model name of each speaker from the label on the
rear to locate each speaker correctly.
ForTH-C50
Front speaker
(SP-THC60F)(2)
Stand (2) Base plate (2)
Assembled speakers
With stand: Refer to steps 1 to Without stand: Refer to steps
3. 2 and 3.
Before assembling —
• Prepare a Phillips screwdriver (not supplied).
• Take care not to drop any component part while assembling;
otherwise, it may cause damage to the floor or injury.
7
when assembling a speaker without stand:
.Speaker
®: Use these screws (IV14 k
45 mm/M4x 1-13/16inches)
when assembling the speaker
with the base plate.
Stand (or speaker
directly)*
Screw IV14 X 20 mm/M4
X 13/16 inches
(supplied)*
When assembling the speaker with the base plate, use the
screws ®.