Basic operations, Turning the system on/off, On the remote control – JVC SP-PWC60 User Manual
Page 19: Press 0/1 audio, On the center unit, Press 0/1, Note, Audio, Press 0, Illiiji
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic operations
The buttons on the remote control are used to explain most of the
operations in this manual. You can use the buttons on the center
unit same as on the remote control for operations unless
otherwise noted.
IMPORTANT
Before using the remote control for the following
operation;
AUDI01.
• Set the remote control mode selector to AUDIO.
]
The buttons described below are used on pages
16to18.
0/1 AUDIO
Remote
selector
VOL+/-
MUTING
►
(play button)
SLEEP
LEVEL +/-
SPK LEVEL
VOLUME
Turning the system on/off
On the remote control:
Press 0/1
AUDIO.
On the center unit:
Press 0
/
1
.
When DVD or USB MEMORY is selected as the source (see page
i 7), the following messages will appear on the TV screen.
illiiji
r
“OPEN’TCLOSE”:
Appears when opening or closing the disc tray.
“NOW READING”
Appears when the system is reading the disc/file information.
“REGION CODE ERROR!”:
Appears when the Region Code of the DVD VIDEO does not
match the code the system supports. The disc cannot be
played back.
“NO DISC”:
Appears when no disc is loaded.
“NO USB DEVICE”:
Appears when no USB mass storage class device is connected.
“CANNOT PLAY THIS DISC”:
Appears when unplayable disc is loaded.
“CANNOT PLAY THIS DEVICE”:
Appears when unplayable USB mass storage class device is
connected.
NOTE
The STANDBY lamp on the center unit lights red when the power is
turned off. The lamp goes off when the power is turned on.
The power supply to the subwoofer is linked to the center unit. The
POWER ON lamp on the subwoofer lights green when the power is
turned on.
A small amount of power is consumed even when the power is turned
off (center unit only). This is called standby mode and the STANDBY
lamp lights in this mode. Unplug the power cord from the AC outlet
to turn the power ott completely.
You can also turn on the system by pressing the following buttons:
- One of the DISC (1-5) buttons (with SHIFT pressed) on the remote
control
- One of the DISC (1-5) ^ buttons on the center unit
- One of the source selecting buttons or ► (play button) on the
remote control
- One of the DISC (1-5) ► buttons or ► on the center unit.
STANDBY lamp
PHONES
DISCI'S
iti*
16