Ecr printer motor lock detector, Remote slip printer motor lock detector – Toshiba TEC MA-1400-100 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOl-11014
11. ECR PRINTER MOTOR LOCK DETECTOR
(1) This detects the printer motor lock condition caused by some trouble, such as paper jamming.
(2)
When such a condition is detected, the front display indicates “Error” and none of the keys
(including
[RF]
and
[JF])
will be accepted.
(3)
To regain the normal condition, turn the power of the ECR to OFF, remove the cause of the
motor lock, and then turn the power to ON again.
12. REMOTE SLIP PRINTER MOTOR LOCK
DETECTOR
(1)
This detects the remote slip printer motor lock condition caused by some trouble, such as paper
jamming.
(2)
When such a condition is detected, the front display indicates “Error” and none of the keys
(including
[RF]
and
[JF])
will be accepted.
(3)
To regain the norma! condition, turn the powers of the ECR and the remote slip printer to OFF,
remove the cause of the motor lock, and then turn the powers to ON again.
* If the cause cannot be found in the remote slip printer and only the ECR may be required to work
temporarily without the remote slip printer, remove the remote printer cable from the ECR, and
turn the power of the ECR to ON.
- 3 7 -