CREATIVE PC-CAM 920 Slim - Manual (Page 10)

9
3-3 Power Supply
●
Gently slide the lens cover to the left as illustrated. A
long beep indicates that the camera is turned on.
●
To turn off the camera, gently slide the lens cover to
the right.
●
When the camera is turned on, the red LED flashes,
and the last recorded image appears on the LCD
monitor.
※
This camera has a power-saving feature. If there is no
operation on the camera for 60 seconds, the power is
turned off to prevent the battery from draining. Please
power on camera again.
※
The following features will automatically save the
configuration before the camera is turned off unless
the "Reset Default" has been selected to restore its
factory anticipated settings.
1.Resolution 2. Image Quality 3.Language
4.White balance 5.EV value 6.Frequency
7.PC MODE
3-4 Shutter Button
This camera is designed for 2-step shutter function. A
"[ ]" mark will appear in the center of the LCD monitor
when the Shutter button is pressed and held half way
down. The camera will beep after the Shutter button is
pressed down fully; then release the Shutter button to
take a picture.