CREATIVE PC-CAM 920 Slim - Manual (Page 21)

20
6-1 Setup Mode
By using the Setup Mode, you can adjust the basic
camera settings, including: Image Size, Image Quality,
White balance, and EV Compensation. General setting
format and factory default setting. Setup for language,
date/time and light frequency is as follows:
1. Turn the camera on/off by sliding the lens cover.
2. Press Mode Button
and use Function key
to move to .
3. Press the Button to get into Setup Mode
screen, the LCD monitor will display the menu.
4. Use the “” of the Function key to move
between selections; Use “” to toggle between
selections.
5. Use Button to enter the menu. and confirm
function selections with “” and ””.
6. Lastly, use the Button to confirm selections.
6-2 Record Mode
Record Mode offers you a quick and easy way to take
your ideal pictures.
1. Turn on the camera by sliding the lens cover to go
directly into Record Mode. You can also enter into
Record Mode through Mode Button and use
the Function key to move to , and select
.
Upon entering, images will appear on the LCD monitor.
2. Press and hold the Shutter button down half way to
select the photography location, and a yellow “[ ]" will
appear in the center of the LCD monitor. Select the AE,
and press the Shutter button down fully and release it
to complete the recording.
3. You can use to select two flash light modes
when using the camera: Auto, and Off.
4. Press the Mode Display Button to
toggle the LCD Monitor displays and there are five
display modes: Standard Display, Full Display, Image
Only, LCD Monitor Off, Only Operation Settings.
5. Using the Mode Button to set the details
settings for recording images, e.g., Image Resolution,
Image Quality, Self-timer, and Light Frequency
settings. The menu will appear on the LCD monitor
when Mode Button
is pressed. Use “” of
the Function key to move between selections.
6. Using “” and ”” of the Function key to adjust
the digital zoom. The adjustment ratio of the digital
zoom will appear on the left hand side of the LCD
monitor, from 1.0 time to 4.0 times, with 0.5 times
increase at each adjustment.
7. The green LED will be on when the Macro key on the
left hand side of the camera is toggled to Macro Mode.
6. Getting Started